VTech Birdie Travel Mobile - Page 8

8
4. Attach the electronic module to the
support post by pressing the small
green button on the support post
while sliding the electronic module
onto the support post. Check to
make sure the electronic module is
attached securely to avoid injuries.
5. To use the mobile as a travel mobile,
remove the electronic module from
the mobile support post by pulling
gently on the electronic module while
pressing the green button on the
support post.
6. Thread the Velcro like attachment
strap through the slot on the top of
the electronic module, then secure
the Velcro like attachment strap
together.
7. Use the Velcro like attachment strap
or the claw attachment to attach the
mobile to baby carriers and prams.
Always check to make sure the
mobile is attached securely to avoid
injuries.
1 2