VTech CS6719-2 Abridged User Manual

4
Route the telephone line cord
through the hole on the wall
mount bracket and plug it
into the telephone wall jack.
Route the power cord out of
the telephone base and plug
it into an electrical outlet not
controlled by a wall switch.
3.
Align the holes on the bracket
with the standard wall plate and
slide the bracket down until
it locks securely. Bundle the
telephone line cord
and power adapter cord neatly
with twist ties.
4.
Wall mounting (optional)
To mount your telephone on a wall:
Position the telephone base
against the wall mount bracket
with the extended tabs marked
B on top. Insert the extended
tabs marked B on the wall
mount bracket into the slots
marked B on the back of the
telephone base. Push the
telephone base down until it
clicks securely.
2.Remove the telephone line
cord from the telephone
wall jack, and the telephone
base power adapter from the
electrical outlet (if necessary).
1.
Telephone base overview
IN USE light
FIND HANDSET
Page all system
handsets.
1.
2.
•
1
2

VTech CS6719-2 Specifications

General

Type	Cordless Phone
Handsets Included	2
Frequency	DECT 6.0
Caller ID	Yes
Call Waiting	Yes
Display	Backlit LCD
Intercom	No
Phonebook Capacity	50 names and numbers
ECO Mode Power-Conserving Technology	Yes
Quiet Mode	Yes
Last Number Redial	Yes
Mute	Yes
Volume Control	Yes
Range	Up to 1000 feet
Answering System	No
Expandable	Up to 5 handsets
Battery Life	Up to 10 hours talk time, Up to 5 days standby