Congratulations
on purchasing your new VTech product. Before
using this telephone, please read
Important safety instructions.
This manual has instructions on how to set up
and register your new handset. For instructions
on using the handset, see the Abridged user’s
manual that came with your telephone base.
You may also view or download the online
user’s manual for a full set of installation and
operation instructions at www.vtechcanada.com
.
Parts checklist
Your telephone package contains the following
items. Save your sales receipt and original
packaging in the event warranty service is
necessary.
Charger overview
1 – Charging pole
Handset overview
1 – Handset earpiece
2 – LCD display
3 –
• Show the menu.
• While in a menu, press to select an item, or
save an entry or setting.
4 –
Hang up a call.
Silence the ringer temporarily while the
handset is ringing.
Press and hold to erase the missed call
indicator while the phone is not in use.
Press to return to the previous menu; or
press and hold to return to idle mode, without
making changes.
5 –
Press repeatedly to show other dialing
options when reviewing a caller ID log entry.
6 –
Press to start an intercom conversation
or transfer a call (for multi-handset models
only).
7 – Microphone
8 –
• Mute the microphone during a call.
• Delete digits or characters while using the
dialing keys.
Silence the ringer temporarily while the
handset is ringing.
•
•
•
•
•
•
•
9 –
Make or answer a call using the handset
speakerphone.
During a call, press to switch between the
speakerphone and the handset earpiece.
10 –
• While you have set the dial mode to pulse
and on a call, press to switch to tone dialing
temporarily.
11 –
Press to add a space when entering names.
12 –
• Press repeatedly to add or remove 1 in front
of the caller ID log entry before dialing or
saving it to the phonebook.
• Press and hold to set or dial your voicemail
number.
13 –
• Make or answer a call.
• Answer an incoming call when you hear a call
waiting alert.
14 –
• Press repeatedly to review the redial list.
• Press and hold to insert a dialing pause while
entering a number.
15 –
• Review the phonebook when the phone is
not in use.
• Increase the listening volume during a call.
• Scroll up while in a menu, phonebook, caller
ID log, or redial list.
• Move the cursor to the right when entering
numbers or names.
Review the caller ID log when the phone is not
in use.
Decrease the listening volume during a call.
Scroll down while in a menu, phonebook,
caller ID log, or redial list.
Move the cursor to the left when entering
numbers or names.
16 – light
• On when the handset is charging.
•
•
•
•
•
•
•
Display icons overview Install the battery
Install the battery as shown below.
Charge the new handset without interruption for
at least 30 minutes before registering it to the
telephone base.
To register a handset to the telephone base:
Place the new handset in the telephone
base.
•
•
After about 10 seconds, the handset displays
Registering.... When the registration process
completes, the handset displays Registered
and you hear a beep. The registration process
takes about 90 seconds.
Deregister handsets
If you want to replace a handset or reassign
the designated handset number of a registered
handset, you must deregister all the handsets
and then individually register each handset.
If you want to register a handset to another
telephone base, you must deregister all
handsets, and then register each handset
individually to the desired telephone base. to the desired telephone base.
To deregister all handsets from the
telephone base:
1. Press and hold FIND HANDSET on the
telephone base for about 10 seconds until
the IN USE light on the telephone base
turns on and starts flashing.
2. Immediately press FIND HANDSET again.
You must press FIND HANDSET while the
IN USE light is still flashing. The IN USE
light turns off, and you hear a confirmation
tone.
3. All handsets display To register HS...
and ...see manual alternately when the
deregistration process completes. The
deregistration process takes about 10
seconds.
Operating range
This cordless telephone operates with the
maximum power allowed by the Federal
Communications Commission (FCC). Even
so, this handset and telephone base can
communicate over only a certain distance
- which can vary with the locations of the
telephone base and handset, the weather, and
the layout of your home or office.
When the handset is out of range, the handset
displays Out of range or no pwr at base.
If there is a call while the handset is out of
range, it may not ring, or if it does ring, the call
may not connect well when you press . Move
closer to the telephone base, and then press
to answer the call. If the handset moves out
of range during a telephone conversation, there
may be interference. To improve reception,
move closer to the telephone base.
ECO mode
This power conserving technology reduces
power consumption for optimal battery
performance. The ECO mode activates
automatically whenever the handset is
synchronized with the telephone base.
General product care
Taking care of your telephone
Your cordless telephone contains sophisticated
electronic parts, so it must be treated with care.
Avoid rough treatment
Place the handset down gently. Save the
original packing materials to protect your
telephone if you ever need to ship it.
Avoid water
Your telephone can be damaged if it gets wet.
Do not use the handset outdoors in the rain,
or handle it with wet hands. Do not install the
telephone base near a sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power
surges harmful to electronic equipment. For your
own safety, take caution when using electrical
appliances during storms.
Cleaning your telephone
Your telephone has a durable plastic casing that
should retain its luster for many years. Clean it
only with a dry non-abrasive cloth. Do not use
dampened cloth or cleaning solvents of any kind.
Important safety instructions
When using your telephone equipment, basic
safety precautions should always be followed to
reduce the risk of fire, electric shock and injury,
including the following:
Read and understand all instructions.
Follow all warnings and instructions marked
on the product.
Unplug this product from the wall outlet
before cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
1.
2.
3.
User’s manual
Telephones identified with this
logo have reduced noise and
interference when used with
most T-coil equipped hearing
aids and cochlear implants.
The TIA-1083 Compliant
Logo is a trademark of the
Telecommunications Industry
Association. Used under license.
User’s manual
(Canada version)
To Next Page
Need help?
General
