79
Telephone operation
Telephone operation
Analog corded/cordless 1-line - CTM-A2510/CTM-A2510-USB
Find handset
Use this feature to nd all registered cordless handsets.
To start paging:
Press FIND HANDSET on the telephone base when the telephone is not in use. All idle cordless handsets beep for 60 seconds.
To end paging:
• Press FIND HANDSET again on the telephone base.
-OR-
• Press any key on the cordless handset to stop the paging tone.
Data port
You can connect your modem or fax machine to the telephone line through the DATA port.
USB port (for CTM-A2510-USB only)
The port on the side of the charging stand can be used for charging devices (up to 1A @ 5.1V).