VTech CTM-A2510-USB - Page 95

91
Appendix
Analog cordless charging stand - C4011
Power requirement 6V DC @400mA
Size 3.78 x 2.80 x 4.29 in (96 x 71 x 109 mm)
Analog cordless charging base - C4000
Power requirement 6V DC @600mA
Size 8.11 x 3.70 x 2.87 in (206 x 94 x 73 mm)
Analog cordless charging stand - C4010
Power requirement 6V DC @600mA
Size 3.78 x 2.80 x 4.29 in (96 x 71 x 109 mm)
Analog cordless charging base - C4001
Power requirement 6V DC @400mA
Size 8.11 x 3.70 x 2.87 in (206 x 94 x 73 mm)
Technical specications
Appendix
Analog cordless charging stand - C4011-USB
Power requirement 6V DC @1400mA
Size 3.78 x 2.80 x 4.29 in (96 x 71 x 109 mm)
USB charging port Provide charging current up to 1A
Analog corded/cordless 1-line - CTM-A2510-USB
Frequency Control Crystal controlled PLL synthesizer
Transmit frequency Handset: 1921.536-1928.448 MHz
Telephone base: 1921.536-1928.448 MHz
Channels 5
Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may vary according to
environmental conditions at the time of use.
Power requirements Handset: 2.4V Ni-MH battery
Telephone base: 6V DC @600mA
Charging stand: 6V DC @1400mA
Message waiting signal Steady/periodic high voltage pulse, periodic low voltage pulse, reverse polarity, FSK, Siemens
and/or Panasonic
Speed Dial memory Telephone base: up to 11 memory locations; up to 32 digits
Cordless handset: up to 3 memory locations; up to 32 digits
Size Telephone base: 8.03 x 6.06 x 3.78 in (204 x 154 x 96 mm)
Handset: 8.39 x 1.89 x 1.65 in (213 x 48 x 42 mm)
Charging stand: 3.78 x 2.80 x 4.29 in (96 x 71 x 109 mm)
USB charging port Provide charging current up to 1A