VTech CTM-C4012 User Manual

EN - 18
• To switch a call from the telephone
base speakerphone to the cordless
handset which is not on the telephone
base cradle, press TALK or on the
cordless handset.
• To switch a call from the telephone base
speakerphone to the cordless handset
which is cradled on the telephone
base, lift the cordless handset from the
telephone base and press TALK or .
Join a call
During a call, press TALK or on another
cordless handset to join.
Handset speakerphone
During a call, press on the cordless handset
to switch between speakerphone mode and
handset earpiece mode. The key illuminates
when in speakerphone mode.
Redial
The last dialed number on the telephone base
is stored for 15 minutes.
Redial the last dialed number from the
telephone base
Press LINE or to listen for a dial tone. Then
press REDIAL.
Volume
Listening volume can be adjusted on the cordless
handset and the telephone base.
Adjust the listening volume
• During a call on the handset, press –
VOLUME + to adjust the listening volume.
The next call returns to the default listening
volume.
• During a call on the telephone base,
press VOLUME + or – to adjust the
listening volume. The next call returns to
the default listening volume.
Adjust the ringer volume of the telephone
base
Ringer volume of the telephone base can be
adjusted.
When the telephone base is idle, press VOLUME
+ or – to adjust the ringer volume.
Call waiting
Call waiting when using the cordless
handset
1. When you hear a call waiting tone during a
call, press TALK/FLASH key on the cordless
handset to put the current call on hold and
take the new incoming call.
2. To switch back and forth between calls, press
TALK/FLASH key.
3. To end the active call, press OFF, and then
press TALK/FLASH to resume the other call.
Call waiting when using the telephone base
1. When you hear a call waiting tone during a
call, press FLASH key on the telephone base
to put the current call on hold and take the
new incoming call.
2. To switch back and forth between calls, press
FLASH key.
3. To end the active call, press LINE key or
, and then press LINE key or again to
resume the other call.
Mute
Mute the microphone
1. During a call, press MUTE / .
• The MUTE / key on the handset /
telephone base illuminates when the
mute function is turned on. You can hear
the party on the other end, but they
cannot hear you.
2. Press MUTE / again to resume the
conversation.
• The light on the key turns off.

VTech CTM-C4012 Specifications

General

Brand	VTech
Model	CTM-C4012
Category	Telephone
Language	English