EasyManuals Logo

VTech CTM-C4012 User Manual

VTech CTM-C4012
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
EN - 25
English
Question Suggestions
12. I hear other calls when using the telephone.
Disconnect the telephone base from the
network wall jack and connect a different
working SIP telephone. Check your SIP
server settings. If calls are still not clear,
the problem is probably in the wiring or
network server. Contact your telephone
service provider (charges may apply).
13. I hear noise on the cordless handset and
the keys do not work.
Make sure the Cat-5 network cable is
plugged in correctly and securely.
Unplug the Cat-5 network cable. Wait for
15 seconds before plugging it back in.
14. Common cure for electronic equipment.
If the telephone is not responding
normally, put the cordless handset in
the telephone base. If it does not fix the
problem, try the following (in the order
listed):
a. Disconnect the power to the telephone
base.
b. Disconnect the battery on the cordless
handset.
c. Wait a few minutes before connecting
power to the telephone base.
d. Install the battery again and then
place the cordless handset in the
telephone base.
e. Wait for the cordless handset to
synchronize with the telephone base.
Allow up to one minute for this to take
place.

Other manuals for VTech CTM-C4012

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the VTech CTM-C4012 and is the answer not in the manual?

VTech CTM-C4012 Specifications

General IconGeneral
BrandVTech
ModelCTM-C4012
CategoryTelephone
LanguageEnglish

Related product manuals