VTech DS6421-2 - Page 23

18
Bluetooth
Add a cell phone (continued)
Press NEXT to turn on the telephone base discoverable
mode. The screen displays Set cell to search base:
VTech DS6421 discoverable PIN: 0000. Promptly turn
on the Bluetooth feature of your cell phone and search
for or add new devices.
Your cell phone may require a passcode. In this case
the handset screen displays Check cellular. ENTER
PASS CODE. Enter the cell phone passcode into the
handset and press SET to save.
Enter the PIN of the telephone base (the default PIN
is 0000) into your cell phone to continue the pairing
process. The handset displays Adding Cell Phone A
to device list... on the screen.
When a device is successfully connected, the handset displays Cell
Phone A is added and connected to base. You hear a conrmation
tone. The corresponding status icon ( 1 or 2) displays. The
corresponding device light on the telephone base (D1 or D2)
turns on.
If you have trouble pairing your cell phone, it may not be compatible
with your DS6421. Check the Bluetooth compatibility list at
www.vtechphones.com.
5.
•
6.
7.
The pairing process may take up to one minute. If the pairing process fails,
try again.
The steps for the pairing process may vary for different cell phones. If
this happens, follow the prompts on your cell phone and your DS6421 to
complete the pairing process.
If you put the handset back in the telephone base or charger while pairing,
the pairing is cancelled and the handset returns to idle mode.
•
•
•
Adding
Cell Phone A
to device
list...
Cell Phone A
is added
and connected
to base.