VTech DS6621-2 Abridged User Manual

8
3JOHFSUPOFIBOETFU
You can choose from different ringer tones.
Press .&/6 when the handset is not in use.
Scroll to 3JOHFST, and then press 4&-&$5.
Scroll to choose )PNFSJOHUPOF or $FMMSJOHUPOF, and then press 4&-&$5.
Press
or to sample each ringer tone, and then press 4&-&$5 to save.
If you turn off the ringer volume, you will not hear ringer tone samples.
4FUEBUFBOEUJNF
If you subscribe to caller ID service, the day, month, and time are set automatically
with each incoming call. You can also set the date and time manually.
Press .&/6 when the handset is not in use.
Scroll to 4FUEBUFUJNF, and then press 4&-&$5.
Use the dialing keys (-) to enter the month, date, and year, and then
press 4&-&$5.
Use the dialing keys (-) to enter the hour and minute.
Press
or to choose ". or 1., and then press 4&-&$5 to save.
5FMFQIPOFPQFSBUJPO
.BLFBIPNFDBMM
Press )0.& or , and then dial the telephone number.
.BLFBDFMMDBMM
Press $&--. Enter the telephone number and then press $&-- to dial.
03
Enter the telephone number and then press
$&-- to dial.
After first pressing $&--, you may need to choose a cell device. Scroll to
select the desired cell device when necessary, and then press 4&-&$5.
While using the cell line, place your cell phone closer to the telephone base, and
make sure that there are no physical obstacles between the telephone base and
the cell phone, such as large furniture or thick walls.
"OTXFSBIPNFDFMMDBMM
Press )0.&, $&--, , or any dialing key.
&OEBIPNFDFMMDBMM
Press0'', or put the handset to the telephone base or charger.
4QFBLFSQIPOF
During a call, press to switch between speakerphone and normal handset use.
7PMVNF
During a call, press 70-6.& or 70-6.& to adjust the listening volume.
The handset earpiece volume setting and speakerphone volume setting are independent.
.VUF
The mute function allows you to hear the other party but the other party cannot hear you.
During a call, press .65&. The handset displays .VUFE.
Press .65& again to resume the conversation. The handset displays
.JDSPQIPOFPO.
$BMMXBJUJOH
When you subscribe to call waiting service from your telephone service provider,
you hear an alert tone if there is an incoming call while you are on another call.
$BMMXBJUJOHPOUIFIPNFMJOF
Press '-"4) to put the current call on hold and take the new call.
Press '-"4) to switch back and forth between calls.
$BMMXBJUJOHPOUIFDFMMMJOF
Press
$&-- to put the current call on hold and take the new call.
Press $&-- to switch back and forth between calls.
5FNQPSBSZSJOHFSTJMFODJOH
When the telephone is ringing, you can temporarily silence the ringer of the handset
without disconnecting the call. The next call rings normally at the preset volume.
Press 0'' or .65&on the handset. The handset displays

5FNQPSBSZUPOFEJBMJOH
If you have pulse (rotary) service only, you can switch from pulse to tone dialing
temporarily during a call.
During a call, press
.
Use the dialing keys to enter the relevant number. The telephone sends touch-tone
signals. It automatically returns to pulse dialing mode after you end the call.
1.
2.
3.
4.
1.
2.
3.
4.
5.
•
•
•
•
•
•
•
•
•
1.
2.
•
•
•
•
•
1.
2.

VTech DS6621-2 Specifications

General

Color	silver
Speakerphone	yes
Expandable	yes
Paging Locator	yes
Volume Control	yes
Intercom	yes
Incoming Lines	1
New Message Indicator	yes
Caller ID	yes
Call Waiting	yes
Answering System	yes
Flash Function	yes
Maximum Incoming Message Length	25 minutes
Handsets	yes
Expansion Base Stations	1
Expansion Handsets	2, 5
Backlit Keypad	yes
Keypad Location	handset
Bluetooth	yes
Remote Access	yes
Frequency	dect 6.0 digital

Weight and Dimensions

Depth	3.5 inches
Height	6.8 inches
Width	5.8 inches
Net Weight	16 ounces