VTech Go!Go! Smart Animals - Assembly Instructions

8
ASSEMBLY INSTRUCTIONS
With the VTech
®
Go! Go! Smart Animals
®
Doggie Playhouse™,
safetycomesrst.Toensureyourchild’ssafety,adultassembly
isrequired.
1. Attach the FRONT WALL to the
SmartPoint
®
BASE. Then, attach the
BACK WALL to the SmartPoint
®
BASE
as shown. You will hear a “click” sound
to indicate each wall is secured to the
SmartPoint
®
BASE. Once the walls are
connected, they cannot be detached.
2. Attach the ROOF to the top of the dog
house as shown. You will hear a “click”
sound to indicate the ROOF is secure.
Once the ROOF is connected, it cannot
be detached.
3. Insert the SLIDER WITH BEADS into
the ROOF. You will hear a “click” sound
to indicate the SLIDER WITH BEADS is
secure. Once the SLIDER WITH BEADS
is connected to the ROOF, it cannot be
detached.
4. Insert the TREE WITH FENCE into the
SmartPoint
®
BASE as shown. Once
the TREE WITH FENCE is connected
to the SmartPoint
®
BASE, it cannot be
detached.
ASSEMBLY INSTRUCTIONS