4
GETTING STARTED
BATTERY INSTALLATION - CHARACTER
1. Make sure the unit is OFF.
2. Locate the battery cover on the bottom of the
unit. Use a screwdriver to loosen the screws.
3. Install 2 new “AAA” size (LR03/AM-4)
batteries following the diagram inside
the battery box. (The use of new alkaline
batteries is recommended for maximum
performance.)
4. Replace the battery cover and tighten the
screws to secure.
BATTERY INSTALLATION - UNICORN
1. Make sure the unit is OFF.
2. Locate the battery cover on the bottom of the
unit. Use a screwdriver to loosen the screw.
3. Install 4 new “AA” size (LR6/AM-3) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover and tighten the
screw to secure.
GETTING STARTED
To Next Page
Loading...
Need help?
General