VTech Go! Go! Smart Wheels Spiral Construction Tower

12
ASSEMBLY INSTRUCTIONS
1. Assemble the 3-loop spiral track components following the steps
below:
A: Insert one Spiral Support into the Spiral Track Base, then
attach the other Spiral Support. Make sure you hear a clicking
sound to confirm they are firmly connected. Tighten it with two
screws to secure.
B: Attach Track A to the Spiral Support; attach Track B to
Track A, attach Track C to Track B; attach the Sign to the Tower
Support.
With the Go! Go! Smart Spiral Construction Tower™, safety
comes first. To ensure your child’s safety, adult assembly is required.