11
4. Insert the antenna into the podium wall as shown. Then, insert
this assembled podium wall and the trophy into the slots on the
SmartPoint
®
podium base as shown. You will hear a “click” sound
to indicate the pieces are secure. Once these pieces are connected
to the SmartPoint
®
podium base, they cannot be detached.
5. Insert the podium support into the assembled SmartPoint
®
podium
base from step four. Next, attach this SmartPoint
®
podium base
with support to the pit stop wall. When the pieces are connected,
you will hear a “click” sound and they cannot be detached.
6. Insert the long SmartPoint
®
ramp
track onto the long ramp support as
shown here. Press firmly to make
sure it is connected securely.
Assembly Instructions
To Next Page
Loading...
