4
Setting up the InnoTV
TM
Follow these steps to set up your InnoTV™:
1. Set up an Internet connection.
2. Your InnoTV™ console may require a firmware update before use. If
this is the case, follow the instructions on-screen to download and
install the firmware update.
3. Once installation is completed the console will restart, and you will be
prompted to register your InnoTV™. Complete the necessary steps to
register your console.
4. Don't forget to set a Parental Controls passcode when you've finished
to prevent your child from accessing the console settings.
Inserting/Removing Cartridges
Insert a cartridge into the cartridge
slot on the top of the console. The
cartridge should lock into place.
Press the
(Eject)
button to remove the
cartridge.
To Next Page
