VTech Ivy the Bloom Bright Unicorn User Manual

4
Battery Installation (Unicorn)
1. Make sure the unit is turned Off.
2. Find the battery cover located on the underside
of the unit, use a screwdriver to loosen the
screw and then open the battery cover.
3. Remove old batteries by pulling up on one end
of each battery.
4. Install 4 new AA batteries following the diagram
inside the battery box.
5. Replace the battery cover and tighten the
screw to secure.
Battery Installation (Magic Wand)
1. Make sure the unit is turned Off.
2. Find the battery cover located on the side of the
unit, use a screwdriver to loosen the screw and
then open the battery cover.
3. Remove old batteries by pulling up on one end
of each battery.
Unlock the Packaging Locks
Rotate the packaging locks 90 degrees
counterclockwise.
Pull out the packaging locks and discard.
ATTENTION :
DANGER D’ÉTOUFFEMENT - Petits éléments.
Ne convient pas aux enfants de moins de 3 ans.

VTech Ivy the Bloom Bright Unicorn Specifications

General

Brand	VTech
Model	Ivy the Bloom Bright Unicorn
Category	Toy
Language	English