41
41
WRIST STRAP ATTACHMENT
INSTRUCTIONS
Step 1: Locate the thread loop on the end of the strap. Insert it into
the groove behind the bar and then push it through.
Step 2: Feed the end of the strap up through the loop and pull it all
the way through.
Step 3: Make sure the loop is securely tightened around the bar.
Note: The wrist strap can also be attached to the strap hook of the
waterproof case.
Wrist Strap must be removed from the Action Cam HD before putting
into the waterproof case to avoid water leaking!
To Next Page
Loading...
