2
INTRODUCTION
Thank you for purchasing the Marble Rush™ Launch Pad!
Get ready for a rush of non-stop action! Build thrilling courses, send the
marbles into motion and compete with family and friends through exciting
challenges complete with sounds and lights. Please refer to the colour
manual for detailed assembly steps.
INCLUDED IN THIS PACKAGE
• Marble Rush™ Launch Pad
• Parent’s guide
• Colour manual
WARNING:
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties, cords and packaging screws are not part of this
toy and should be discarded for your child’s safety.
NOTE: Please keep this Parent's Guide as it contains important information.
INSTRUCTIONS
Battery Removal and Installation
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of
the unit. Use a screwdriver to loosen the
screw. Then, remove the cover.
3. If used batteries are present, remove these
batteries from the unit by pulling up on one
end of each battery.
4. Install 2 new AA (AM-3/LR6) batteries
following the diagram inside the battery
box. (For best performance, alkaline
batteries or fully charged Ni-MH
rechargeable batteries are recommended).
5. Replace the battery cover and tighten the screw to secure.
To Next Page
Loading...
