7
7
ASSEMBLY INSTRUCTIONS
With the Pop-a-Balls
TM
Pop & Count Ball Pit
TM
, safety comes rst. To
ensure your child’s safety, adult assembly is required.
1. Attach the Basket to the Electronic Tree
Activity Panel. You will hear the pieces
snap together to indicate the parts are
connected. Once the parts have been
connected, they cannot be separated.
2. Insert the Electronic Tree Activity Panel to
the Activity Tree Base. You will hear the
pieces snap together to indicate the parts
are connected. Once the parts have been
connected, they cannot be separated.
3. Place the Activity Tree Base in the ball pit.
Hook the two straps on either side of the
Activity Panel Base.
4. Slide the Electronic Tree Activity Panel
against the fabric wall. Locate the two
slots on the back of the Electronic Tree
Activity Panel and fasten it to the fabric
wall using the Attachment Clip. You will
hear the Attachment Clip snap into place
when inserted correctly.
5. To fold up the collapsible ball pit for
storage, remove the Activity Tree and
put the Balls in the middle of the ball
pit. Fold the panel opposite the tallest
panel over the Balls then fold in the two
sides. Tie the two Ties together.
To Next Page
Loading...
