VTech Pop-a-Balls Pop & Surprise Ball Center User Manual

5
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of
the unit. Use a screwdriver to loosen the
screw.
3. Install 2 new AA (LR6/AM-3) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is recommended for
maximum performance.)
4. Replace the battery cover and tighten the screw to secure.
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-
zinc) or rechargeable, or new and used batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinfire.
• Donotchargenon-rechargeablebatteries.
• Removerechargeablebatteriesfromthetoybeforecharging
(if removable).
• Rechargeable batteries are only to be charged under adult
supervision.
With the Pop-a-Balls™ Pop & Surprise Ball Center™, safety
comes first. To ensure your child’s safety, adult assembly is
required.Pleasecarefullyfollowtheassemblyinstructionsbelow
and make sure the final assembly is correct. Adult supervision
is recommended.

VTech Pop-a-Balls Pop & Surprise Ball Center Specifications

General

Brand	VTech
Model	Pop-a-Balls Pop & Surprise Ball Center
Category	Toy
Language	English