8
PRODUCT FEATURES
1. ON/OFF/VOLUME CONTROL SWITCH
To turn the unit ON, slide the ON/OFF/
VOLUME CONTROL SWITCH to the
LOW VOLUME ( ) or the HIGH
VOLUME ( ) position. To turn the
unit OFF, slide the ON/OFF/VOLUME
CONTROL SWITCH to the OFF ( )
position.
2. SPEED CONTROL LOCK
The VTech
®
Sit, Stand & Ride Baby
Walker™ is equipped with a speed
control lock on the two back wheels of
the walker. Slide the lock up for the more
skillful walker. This position has less
tension on the wheels and will allow the
walker to move more freely. Slide the lock
down for toddlers who are just learning
to take their rst steps. This position has the most tension on the
wheels and will not allow the walker to move too quickly. Please
make sure both wheels are set to the same position.
Note: If the unit repeatedly powers down quickly or one of the
lights ashes three times then powers down, we suggest
changing the batteries.
ACTIVITIES
1. Slide the on/off/volume control switch
to turn the unit on. You will hear a playful
song, a fun phrase and a sound. The
lights will ash with the sounds.
Product Features/Activities
To Next Page
Loading...