VTech Sit-to-Stand Dancing Tower User Manual

6
Please remove and discard the try-me
cable between the dancing bear and the
activity panel before assembly.
ASSEMBLY INSTRUCTIONS
1. Place the two base pieces on the
oor. Align them with the left half
above the right half, then push down
to lock them together until you hear
a click.
Use a screwdriver to fasten the three
screws into the holes on the back of
the base to securely fasten the base
pieces together.
2. Insert the two dancing platforms into
the base by rst inserting the small
rods on one side of the platforms
into the corresponding holes on the
base. Then, line up the tags on the
top edges of the dancing platforms to
the corresponding slots in the base.
Slide the tags into the slots while at
Assembly Instructions
74900manual.indd 6 3/15/07 9:24:03 AM

VTech Sit-to-Stand Dancing Tower Specifications

General

Brand	VTech
Model	Sit-to-Stand Dancing Tower
Category	Toy
Language	English