VTech Sit-to-Stand Learn & Discover Table - Assembly Instructions; Product Features; Off;Volume Control Switch; Automatic Shut-off

6
Assembly Instructions / Product Features
ASSEMBLY INSTRUCTIONS
With the VTech
®
Sit-To-Stand Learn & Discover Table
TM
safety
comes rst. To ensure your child’s safety, adult assembly is required.
1. Insert the legs into the slot on the bottom of the main unit.
PRODUCT FEATURES
1. OFF/VOLUME CONTROL SWITCH
To turn the unit ON, slide the OFF/
VOLUME CONTROL SWITCH to the
LOW VOLUME ( ) or HIGH VOLUME
( ) position. To turn the unit OFF,
slide the OFF/VOLUME CONTROL
SWITCH to the OFF ( ) position.
2. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech
®
Sit-To-Stand Learn & Discover
Table
™
will automatically power-down after approximately 60
seconds without input. The unit can be turned on again by pressing
any button.