VTech Sit-to-Stand Ultimate Alphabet Train User Manual

8
4. Insert the carriage front support piece
into the front of the carriage until you hear
it click into place. Next, insert the back
support with the seat into the back of the
carriage until you hear it click into place.
Once you have assembled the carriage,
it cannot be taken apart.
5. Position the soft hinge so that the large
hole is facing up. Insert the hinge into the
hole at the front of the carriage until you
hear it click into place. Once you have
attached the hinge to the carriage, it
cannot be removed.
6. Insert the carriage wheels with axels into
the bottom of the carriage until you hear
them click into place. Once you have
installed the carriage wheels, they cannot
be removed.
7. To attach the carriage to the engine,
insert the soft hinge into the slot on the
back of the engine. You will hear the soft
hinge click into position, which lets you
know the carriage is attached correctly.
Assembly Instructions

VTech Sit-to-Stand Ultimate Alphabet Train Specifications

General

Brand	VTech
Model	Sit-to-Stand Ultimate Alphabet Train
Category	Toy
Language	English