VTech Sit-to-Stand Ultimate Alphabet Train - ASSEMBLY INSTRUCTIONS; Engine and Holder Assembly

7
ASSEMBLY INSTRUCTIONS
1. To assemble the engine wheels, insert
the axels into the sockets on the body of
the engine until you hear them click into
place. Insert the wheels into the axels until
you hear them click into place. Once you
have installed the wheels, they cannot be
removed.
2. Insert the walkie talkie holder into the
the slot below the battery cover until you
hear it click into place. Once you have
installed the walkie talkie holder, it cannot
be removed.
3. Position the handle so that the curved part
of the handle faces the back of the engine.
Insert the handle into the hole on the top
of the engine. Push down on the handle
until you hear it click into place. Once you
have installed the handle, it cannot be
removed.
Assembly Instructions
With the VTech
®
Sit-to-Stand Ultimate Alphabet Train™
safety comes rst. To ensure your child’s safety, adult assembly
is required.