11
Setup
Speed dial
You can store the telephone numbers you wish in desired memory locations (0-9) and
to make speed dial calls. The phone can store up to 10 contacts. We recommend to
store contacts that you may need to call them more often.
Add/ Store/ Change/ Remove a speed dial number
1. Press , and the Line in use LED is on.
2. Press , and then press within 3 seconds.
• You will hear an administrative tone for entering the programming mode. The MUTE LED is on.
3. Press a digit (0-9) for the memory location, followed by the phone number you
want to store.
4. Press to store the number to the memory location.
• You will hear a confirmation tone when the number is saved.
• The newly input number will replace and change the previous one if the memory key had
a phone number assigned before.
• If no number is entered before the key is pressed again, then the memory location
is empty. This will remove a speed dial number if you have assigned one previously.
To Next Page
Loading...
