VTech SN5147 - Page 43

74 75
7. Smart call blocker
Smart call blocker
Set unwelcome calls
Save a caller ID log to the block list
1. Press MENU when the handset is not in use.
2. Scroll to Caller ID log, and then press SELECT.
3. Press SELECT to select Review.
Review the caller ID log entries:
4
Browse through the entries.
When the desired entry
displays, press SELECT.
Direct Sales
595-9511
09:15PM 11/30
NEW
ANS ON
Scroll to Block list, and
then press SELECT.
5
SAVE TO
>Block list
Edit the phone number and
name if needed, and then
press SELECT to save.
6
EDIT NUMBER
595-9511_
EDIT NAME
Salesman_
Control calls without numbers
Use this setting to control “out of area” calls or calls with numbers that are set to
“Private”. You can choose to allow or reject these calls directly. You can also choose to
screen them with or without learning the callers’ names before you decide whether
to answer or reject these calls. Moreover, you can forward these calls to the answering
system.
1
Press CALL BLOCK when the handset is not in use.
Scroll to Calls w/o num,
and then press SELECT.
2
Star name list
>Calls w/o num
Scroll to select Screening,
Allow, Answering sys or
Block, and then press SELECT.
3
CALLS W/O NUM
>Screening
If you select Screening,
scroll to select w/Caller
name or w/o Caller name,
and then press SELECT.
4
SCREENING
>w/ Caller name