VTech SN5147 - Message Playback; To Playback Messages with the Cordless Handset; To Playback Messages at the Telephone Base

106 107
9. Additional devices
Additional devices
Test device signal strength
You can check the signal strength of your devices (SN7021/SN7022, both purchased
separately), for example, before mounting it. Follow the instructions below to check
the signal strength between the device and the telephone base. For Audio doorbell
(SN7021), make sure you mount them in a location where the signal strength is good.
1
Press MENU on the handset when it is not in use.
Scroll to Set device, and
then press SELECT.
2
Settings
>Set device
Press SELECT to select
Check signal.
3
>Check signal
Doorbell
Scroll to select the desired
device, and then press SELECT.
4
DEVICES
>DOORBELL 1
5
When the handset displays Good signal, press SELECT to confirm.
• If the handset displays No signal or Weak signal, check your device
and make sure it is powered on, or select another location nearer to
the telephone base.
When the handset displays Awaiting signal:
Good signal
- OR -
DEVICES
>DOORBELL 1
Press the chime button
on the audio doorbell.
Awaiting
signal
Audio doorbell
DEVICES
>PENDANT 3
Press the CANCEL button
on the audio doorbell.
Awaiting
signal
SOS pendant