4
4
4
3. If used or spent batteries are present, remove these batteries
from the unit by pulling up on one end of each battery.
4. Install 3 new AA batteries following the diagram inside the
battery box. (The use of new alkaline batteries is recommended
for maximum performance).
5. Replace the battery cover and tighten the screw to secure.
6. When closing the battery cover ensure that the screws are
securely tightened. This will avoid any water leakage.
BATTERY NOTICE
• UsenewalkalinebatteriesorfullychargedNI-MH(NickelMetal-
hydride) rechargeable batteries for best performance.
• Useonlybatteriesofthesameorequivalenttypeas
recommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard
(carbon-zinc)orrechargeable(Ni-Cd,Ni-MH),ornewandused
batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinfire.
• Donotchargenon-rechargeablebatteries.
• Removerechargeablebatteriesfromthetoybeforecharging(if
removable).
• Rechargeablebatteriesareonlytobechargedunderadult
supervision.