10
Connect all the parts
1. Locate the click hole below the SmartPoint™ big launching
platform and connect the left tree ramp with the mountain by
connecting the ramp into the click hole. You will hear a “click” to
indicate the piece is secure.
2. Use the Rhino spinning pool to connect the mountain base and
the tree house. You will hear a “click” to indicate the pieces are
secure.
3. Locate the click hole at the bottom of the tree house on the right
side and connect the right waterfall ramp. You will hear a “click” to
indicate the pieces are secure.
4. Attach the SmartPoint™ basket to the long zip line. Insert
the zip line into the left waterfall pillar and the small launching
platform. You will hear a “click” to indicate the pieces are secure.
1
4
4
2
3
To Next Page
Loading...
