VTech Toot-Toot Friends - Assemble Observation Tower and Roofs

9
9
9
4. Insert the OBSERVATION TOWER RAILING into the 1ST FLOOR
BASE. Then, insert the 1ST FLOOR BASE into the GROUND
FLOOR MAIN WALL as shown in the picture.
5. Insert the 1ST FLOOR MAIN
WALL into the 1ST FLOOR BASE
as shown in the picture.
6. Insert the CLOCK TOWER, a TWIN TOWER ROOF and the SINGLE
TOWER ROOF into the 1ST FLOOR MAIN WALL as shown in the
picture. You will hear a “click” sound when the pieces are secure.
Twin Tower with
Toy Engravings