11
11
11
10. Follow the below steps to assemble the swing:
A. Insert the two SWING ROPES into each side of the SWING SEAT.
B. Then, attach the SWING ROPES to the bottom of the SMALL
BRIDGE as shown in the picture.
11. Now, assemble the right side of the palace:
A. Insert the LIFT TOWER SUPPORT COVER into
the tower.
Then, insert the tower into the TOWER BASE. You will hear a
“click” sound when the pieces are secure.
B. Attach the LIFT PLATFORM and SWING to the TOWER
WITH LIFT SUPPORT.
C. Then, insert a TWIN TOWER ROOF into the tower. You will hear
a “click” sound when the pieces are secure.
D. Finally, attach a FLAG to the top of the roof.
C
To Next Page
Loading...
