10
N OTES
• You cannot edit a phonebook entry while
on a call. Refer to the Phonebook section for
more details.
• You cannot copy a caller ID log entry into
the phonebook while on a call. Refer to the
Caller ID log section for more details.
• You cannot erase a redial entry while on a
call. Refer to the Redial list section for more
details.
• Press CANCEL to exit redial, phonebook or
caller ID log when you are on a call.
Find handset
Use this feature to find the system handset.
To start paging:
• Press FIND HS on the telephone base
when not in use.
All idle handsets ring and display
** Paging **.
To end paging:
• Press FIND HS at the telephone base.
-OR-
• Press TALK or any of the dialing keys
on the handset.
N OTES
• Press MUTE to turn off the ringer of a
handset temporarily. Paging tone continues
on the other handset.
• Do not press and hold FIND HS for more
than four seconds. It may lead to handset
deregistration. If the handset displays To
register HS and See manual, refer to the
Register a handset section to register the
handset back to the telephone base.
Redial list
Each handset stores the last five telephone
numbers dialed. Entries are shown in
reverse chronological order. When there
are already five entries, the oldest entry is
deleted to make room for the new entry.
Review a redial list entry
1. Press REDIAL when the handset is not
in use.
2. Press q, p or REDIAL repeatedly until
the desired entry displays.
Dial a redial list entry
1. Press REDIAL when the handset is not
in use.
2. Press q, p or REDIAL repeatedly until
the desired entry displays.
3. Press TALK to dial.
-OR-
1. Press TALK when the handset is
not in use.
2. Press REDIAL and then press q, p or
REDIAL repeatedly until the desired
entry displays.
3. Press SELECT to dial.
Delete a redial list entry
1. Press REDIAL when the handset is not
in use.
2. Press q, p or REDIAL repeatedly to
browse to the desired entry.
3. Press DELETE to delete the displayed
number. You hear a confirmation tone.
To Next Page
Loading...
Need help?
General
