7
Configure your telephone
Use the handset menu
1. Press MENU when the phone is not in
use.
2. Press or until the screen displays
the desired feature menu.
3. Press SELECT.
• To return to the previous menu, press
CANCEL.
• To return to idle mode, press and hold
CANCEL.
Set language
The LCD language is preset to English. You
can select English, French or Spanish to be
used in all screen displays.
1. Press MENU when the handset is not
in use.
2. Press q or p to choose Settings and
then press SELECT twice.
3. Press q or p to choose English,
Français or Español.
4. Press SELECT twice to save your
setting. You hear a confirmation tone.
Set date and time
N OTE
• Make sure you set the date and time
including the year correctly; otherwise the
answering system does not announce the
correct day of the week for your recorded
messages time stamp.
1. Press MENU on the handset when not
in use.
2. Press q or p to choose Set
date/time and then press SELECT.
3. Use the dialing keys (0-9) to enter the
month (MM), date (DD) and year (YY).
Then press SELECT.
4. Use the dialing keys (0-9) to enter the
hour (HH) and minute (MM). Then
press q or p to choose AM or PM.
5. Press SELECT to save your setting.
Your hear a confirmation tone.
Home area code
If you dial local calls using only seven digits
(area code not required), you can program
your home area code so that when you
receive a call within your local area, the
telephone number is automatically stored
in the caller ID log without the area code.
1. Press MENU when the handset is not
in use.
2. Press q or p to choose Settings and
then press SELECT.
3. Press q or p to choose Home area
code, and then press SELECT. The
screen displays the currently stored
home area code.
4. Use the dialing keys (0-9) to enter the
desired home area code.
• Press DELETE to delete a digit.
• Press and hold DELETE to delete
all digits.
5. Press SELECT to confirm. You hear a
confirmation tone.
N OTE
• If, in the future, your telephone service
provider requires you to dial the area code
when making a local call, or, if you move to
a location that requires it, delete the home
area code you have already programmed
following the steps above. After you have
deleted the home area code, ___ appears.
Dial mode
The dial mode is preset to touch-tone
dialing. If you have pulse (rotary) service,
you need to change the dial mode to
pulse dialing before using the telephone.
1. Press MENU when the handset is not
in use.
2. Press q or p to choose Settings, and
then press SELECT.
3. Press q or p to choose Dial mode,
To Next Page
Loading...
Need help?
General
