VTech VG104 User Manual

11
Find handset
Use this feature to find the system handset.
To start paging:
• Press /FIND HANDSET on the
telephone base when not in use.
All idle handsets ring and display
** Paging **.
To end paging:
• Press /FIND HANDSET at the
telephone base.
-OR-
• Press or any of the dialing keys on
the handset.
N OTES
• Press MUTE to turn off the ringer of a
handset temporarily. Paging tone continues
on the other handset.
• Do not press and hold /FIND HANDSET
for more than four seconds. It may lead
to handset deregistration. If the handset
displays To register HS and See manual,
refer to the Register a handset section to
register the handset back to the telephone
base.
Redial list
Each handset stores the last five telephone
numbers dialed. Entries are shown in
reverse chronological order. When there
are already five entries, the oldest entry is
deleted to make room for the new entry.
Review a redial list entry
1. Press REDIAL when the handset is not
in use.
2. Press q, p or REDIAL repeatedly
until the desired entry displays.
Dial a redial list entry
1. Press REDIAL when the handset is not
in use.
2. Press q, p or REDIAL repeatedly
until the desired entry displays.
3. Press to dial.
-OR-
1. Press when the handset is not in
use.
2. Press REDIAL and then press q, p or
REDIAL repeatedly until the desired
entry displays.
3. Press SELECT to dial.
Delete a redial list entry
1. Press REDIAL when the handset is not
in use.
2. Press q, p or REDIAL repeatedly to
browse to the desired entry.
3. Press DELETE to delete the displayed
number. You hear a confirmation tone.

VTech VG104 Specifications

General

Brand	VTech
Model	VG104
Category	Cordless Telephone
Language	English