VTech VH6210 Quick Start Guide

4. Hook the headset on your ear. Adjust the angle of the headset until the microphone is pointing towards your mouth.
Remove the earbud and earhook
Remove the earbud and earhook, when you need to replace them in the Over-the-ear hook, when you need to change to the over-the-head
and behind-the-neck style.
Hold both sides of the earbud. Twist and pull the earbud until it separates from the earpiece.
Rotate the earhook to vertical direction.
Pull the earhook until it separates from the headset.
To re-insert another set of earbud and earhook, refer to the previous section.
1.
2.
3.

VTech VH6210 Specifications

General

Brand	VTech
Model	VH6210
Category	Headsets
Language	English