EasyManua.ls Logo

VTech vt9113 - Handset Features; Base Unit Features

VTech vt9113
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
ON LED
The ON LED lights when the Handset is on an active call.
It flashes in cadence with an incoming ring.
It flashes quickly during Programming mode.
It flashes slowly when the battery pack is low.
ON/ FLASH KEY
Press the ON key to make a call.
If you are currently on a call, and you hear a call waiting tone, press ON to switch
to the second call. Press ON again to return to the original call.
VOLUME CONTROL
Adjust the volume of what you hear through the Handset.
While on a call, press the
or key to adjust the listening volume. The Handset
will emit a double beep when the maximum or minimum volume level has been reached.
OFF KEY
Press the OFF key to exit all modes of operation.
REDIAL / PAUSE KEY
When you hear the dial tone, press REDIAL to call the last number dialed on your
phone.
It can also be used to store the last number dialed into the speed dial memory. See
Storing a Redial Number into Speed Dial for details.
You can store pauses into your speed dial numbers. See Storing Pauses in Memory
for details.
CHAN KEY
Pressing the CHAN key when the Handset is in use will activate a channel change
to the next free channel.
This is used if you are experiencing noise or interference on the current channel.
MEM/PROG KEY
Press the MEM key to enter MEMORY mode.
The sequence for dialing out a speed dial number in memory is: ON, MEM, Number
Button (0-9).
Press MEM/PROG to enter programming mode. See Programming Speed Dial
Numbers for more details.
TONE/ * KEY
In PULSE dialing mode, this key is used to switch to Temporary TONE dialing mode.
HANDSET FEATURES
BASE UNIT FEATURES
IN USE/CHARGING LED
The LED illuminates steadily when the Handset is in the Base cradle to indicate that
the Handset battery is being charged.
The LED illuminates whenever the Handset is being used.
This LED also flashes with the cadence of the incoming ring.
PAGE KEY
Press the PAGE key to page the Handset.
Press it second time to cancel a page.
The Base will ring the Handset for 1 minute before ending the page automatically.
The Handset can also cancel the page by pressing the OFF key.

Related product manuals