12
Jump Mat and Springs
Attach the Straight Poles into the T-Joiners
and click the Push-Button into the hole in the
T-Joiner as seen in the diagram.
5
STEP
Attach the W-Poles into the Straight Poles
and click the Push-Buttons into the holes at
the bottom of your Curved Poles to complete
your Flare frame.
4
STEP
Safety Net
6
STEP
A. Layout the Safety Net (found in Box C) on top of the jump mat.
B. Locate the Batch Tag and rotate your net so that this lines up with the Batch Tag on your Jump Mat.
A
B
To Next Page
Loading...
