VuQube VQ1000 Operating Instruction

24 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

DRAFT 05-20-10

11200 Hampshire Avenue South, Bloomington, MN 55438-2453

Phone: (800) 982-9920 Fax: (952) 922-8424

www.kingcontrols.com

20963 REV A

Digital TV Solutions for Mobile Markets

®

Portable Satellite TV Antenna

Model VQ1

Operating Instructions

Part Number VQ1000

Table of Contents

Other manuals for VuQube VQ1000

Operating Instructions28 pages

Operation Manual7 pages

Owner's Manual24 pages

Questions and Answers:

A
Arthur WebbAug 15, 2025
What to do if the VuQube VQ1000 remote is not sending commands?
- G
  Gabriella NguyenAug 15, 2025
  If your VuQube TV Antenna remote isn't sending commands, try the following: * Turn the remote OFF, wait 5 seconds, and turn it back ON. * Ensure the receiver is turned ON. * Verify the coax cable from the antenna is connected to the receiver. * Move the remote closer to the antenna. * Change the batteries in the remote control. The cause may be low batteries in the remote.
D
davidthompsonAug 18, 2025
How to fix VuQube TV Antenna that cannot lock onto the correct satellite?
- E
  Elizabeth ManningAug 19, 2025
  If your VuQube TV Antenna cannot lock onto the correct satellite, make sure to move the VuQube to have an unobstructed view of the southern sky. This should allow it to properly lock onto the satellite.

VuQube VQ1000 Specifications

General

Brand	VuQube
Model	VQ1000
Category	TV Antenna
Language	English