Need help?Do you have a question about the VWR avantor PH-2500L and is the answer not in the manual?
General| Brand | VWR |
|---|---|
| Model | avantor PH-2500L |
| Category | Measuring Instruments |
| Language | English |
Lists all items included in the pH meter package for setup and initial use.
Provides important warnings and user advisories for safe and proper operation of the meter.
Details the features, capabilities, and technical specifications of the VWR pH-2500L meter.
Describes the physical layout of the meter, including the LCD display, buttons, and ports.
Outlines recommended procedures for maintaining the pH meter's condition and performance.
Explains the procedure for powering the pH meter on and off, including error handling.
Guides on the necessary steps and connections before starting measurements with the pH meter.
Instructions on how to prepare the pH electrode for accurate measurements and handling.
Details how to configure settings like resolution, electrode number, and calibration data.
Explains the process of calibrating the pH electrode for accurate measurements using buffer or standard solutions.
Describes how to assess the pH electrode's performance and calibration status using offset and efficiency.
Covers the procedures for taking pH measurements with automatic or manual temperature compensation.
Guides on configuring settings for redox potential (ORP) measurements, including resolution and relative measurement.
Explains how to perform redox potential (ORP) measurements using the meter as an accurate voltmeter.
Details how to configure settings for temperature measurements, such as resolution and manual compensation.
Explains the procedure for taking temperature measurements using the connected temperature probe.
Accesses various settings and configurations for the meter via different tabs.
Configures parameters for collecting measurement series, including mode, interval, and number of samples.
Adjusts general settings like language, sound, brightness, and time/date.
Displays software version, serial number, and factory calibration date of the meter.
Covers how to record, store, and view measurement data in the meter's memory.
Explains how to generate, view, and transmit calibration reports to a PC.
Details how to connect the meter to a PC for data transfer and software utilization.
Provides detailed technical specifications and performance data for pH, mV, and temperature measurements.
Lists part numbers and accessories for ordering replacement electrodes, probes, and buffer solutions.
Information on how to obtain technical support and service for the meter via web resources.
Outlines the warranty terms and conditions, including coverage and limitations for the pH meter.
Instructions on how to safely and environmentally dispose of the equipment at the end of its lifecycle.
To Next Page
