Need help?Do you have a question about the VWR MCT 100 and is the answer not in the manual?
General| Capacity | 100 g |
|---|---|
| Measurement Range | 0-100 g |
| Display | LCD |
| Readability | 0.1 mg |
| Repeatability | 0.1 mg |
| Linearity | ±0.2 mg |
| Weighing Units | g, mg |
| Resolution | 0.1 mg |
| Power Supply | AC Adapter |
| Accuracy | ±0.002 g |
Details critical safety warnings, health hazards, and handling precautions for instrument use.
Lists standard contents, instructions for unpacking, and initial instrument setup.
Defines the specific purpose, application scope, and operational limitations of the MCT 100.
Explains manual symbols and provides detailed technical specifications of the MCT 100.
Lists available reagents and explains the functions of the instrument's buttons.
Covers switching on/off, selecting tests, and basic measurement sequences.
Explains the feature that memorizes the last used test method.
Details the One Time Zero function for calibration.
Instructions for repeating tests and re-performing the zero calibration.
Instructions for controlling the display backlight and recalling stored data.
Guidance on using the countdown function for measurement reaction periods.
Guide to navigating instrument menus for data recall and settings.
Instructions for transmitting stored data using the IRIM module.
Procedures for setting date/time and performing user-specific calibration.
How to adjust, confirm, and save calibration results.
Procedure for resetting the instrument's calibration to factory defaults.
Best practices and tips for accurate photometric measurements.
Important considerations for using different measurement methods and reagents.
Illustrations and instructions for correct vial positioning and filling for measurements.
Procedures for measuring free and total chlorine using DPD tablets.
Formula for calculating combined chlorine from measurement results.
Information on measurement tolerances and key notes for Chlorine LR analysis.
Procedures for measuring free and total chlorine using DPD HR tablets.
Formula for calculating combined chlorine from measurement results.
Details on measurement tolerances and key notes for Chlorine HR analysis.
Steps for measuring ozone concentration using DPD tablets.
Information on ozone measurement tolerances and important notes.
Steps to measure chlorine dioxide without chlorine interference.
Steps to measure chlorine dioxide with chlorine interference.
Details on chlorine dioxide measurement tolerances and important notes.
Explanation of operating messages and a list of error codes with solutions.
Guidelines for repair, list of spare parts, and technical service contact information.
Details VWR product warranty terms and local compliance information.
Instructions for the proper disposal of the equipment at the end of its lifecycle.
To Next Page
