Need help?Do you have a question about the VXi BlueParrott Xplorer and is the answer not in the manual?
Details risks of hearing damage from high volume levels and advice to prevent it.
Covers usage in vehicles, water immersion, small parts, power cords, and temperature limits.
Lists all accessories provided with the VXi BlueParrott Xplorer headset, including the headset, case, and cables.
Defines important terms like On, MFB, Multipoint Mode, Paired, Standby Mode, and Talk Mode for user understanding.
Identifies and describes the headset's parts: Volume Up/Mute, Volume Down, Microphone Boom, On/Off Switch, Indicator Lights, MFB, and NFC Zone.
Explains how indicator lights (blue/red) show the battery charge level during charging and full charge status.
Details the headset's behavior when connected to a charger while on, and notes to avoid charging mid-call.
Instructions for turning the headset on, off, and its behavior in standby mode after initial pairing.
Details NFC (One-Touch) pairing and manual pairing procedures for connecting the headset to a phone.
Guidance on wearing the headset, choosing ear buds and hooks, and adjusting the microphone boom for optimal fit.
Instructions for making, answering, and rejecting calls using the headset's Multifunction Button (MFB).
Explains how to connect to multiple devices simultaneously and use proximity pairing for initial setup.
Covers redialing, call waiting, rejecting calls, voice control, muting, and audio transfer features.
Instructions on how to turn the headset's indicator lights on or off using button combinations.
Procedure to clear the headset's pairing memory and reset all connected devices.
General| Bluetooth | Yes |
|---|---|
| Multipoint pairing | Yes |
| Charging Time | 2.5 hours |
| Standby Time | Up to 500 hours |
| Range | Up to 300 feet |
| Compatibility | Bluetooth-enabled devices |
To Next Page
