Volume up
Volume down
Mute
Modular plug
X100 USB ADAPTER
Compatible with Windows® and
Macintosh® operating systems
QD
1. Insert the modular plug into the X100 USB adapter.
2. Insert the USB connector into a USB port on your computer
(not into the keyboard).
3. Connect the QD to your VXi headset.
4. Check the audio settings (speaker and microphone) on
your softphone and in Windows to ensure that the initial
settings are at an appropriate level.
Connecting the X100 USB Adapter
Installing the X100 USB Adapter
For Windows Me or higher: Installation is automatic once
inserted into the USB port of your computer.
For Macintosh: Please visit the X100 USB Adapter support
section at www.vxicorp.com for more information.
USB connector
USB adapter
To Next Page
Need help?
General