Need help?Do you have a question about the Vybra VS001-W and is the answer not in the manual?
Follow basic precautions to reduce fire, electric shock, and injury risks when using electrical appliances.
Appliance is for indoor use only, requires professional repair, and must be kept away from heat sources and flammable materials.
Verify voltage, avoid water proximity, do not cover, and use only the provided switch.
Do not insert foreign objects, avoid dust, do not use timers, and unplug if appliance fails.
Ensure power outlet is accessible and avoid connecting multiple high-power appliances to the same socket.
Risk of fire exists if the appliance is covered or wrongly positioned.
Do not use programmers or timers that start the appliance automatically.
If the appliance fails, immediately turn off power and unplug the cord.
This product uses PTC heating elements to heat rooms with hot air.
Diagram identifying key parts: Cover, Air outlet, Body, Power button, Display, Air inlet, Base, Power cable, Switch.
Details include model number, rated voltage, frequency, oscillating angle, output power, and timer settings.
Activates the cooling fan function.
Enables or disables the fan's oscillating movement.
Increases or reduces the fan's air speed.
Activates the heating function.
Sets the fan to its maximum speed setting.
Allows setting the appliance's operating duration.
Engages a quiet, low-speed operation mode.
Increases or decreases the set temperature.
Activates the germicidal UV lamp for sterilisation.
Point remote at the unit for best signal; effective distance is 5 meters.
Potential frequency overlapping and interference with other appliances.
ON/OFF button may activate standby; use power switch for full shutdown.
Switch off using the power switch; unplug for extended periods.
Press heating button; ambient temperature shown, set desired temperature.
Heating engages when set temperature is higher than ambient temperature.
Hot airflow stops and turns to cool breeze once set temperature is reached.
Heating function switches on automatically if ambient temperature is lower than set.
Displays '01' for below 0°C; negative values are not shown.
Appliance switches off automatically after 9 hours of continuous heating.
Temperature is set via remote control only, not directly on the appliance.
Insert plug, use power switch to standby; press power button to start fan.
Press main power button while running to cycle through 9 speed settings.
Press and hold power button for 1 second to start/stop oscillation.
Place in a horizontal position away from high-temperature and humidity.
Do not cover the unit and keep objects at least 1 meter away.
Equipped with overheat protection and automatic failover for safety.
If sensor triggers, unplug and allow unit to cool down.
Open cover, insert two AAA batteries, and close the cover.
Check plug connection and ON/OFF switch.
Verify batteries, correct insertion, and alignment with signal receiver.
Wipe with a soft, dry cloth; use mild detergent solution for stubborn dirt.
Use a soft brush or vacuum cleaner to remove dust from vents.
Wipe with a soft, dry cloth; remove batteries for long-term storage.
Store in a plastic bag, away from vibration and high temperatures.
Keep away from water, direct sunlight, and high-humidity environments.
Phone must connect to Wi-Fi; download 'TUYA smart' or 'SMART life' app.
Create account, press and hold LED display to enter pairing mode.
Select Wi-Fi network, enter password, and confirm.
Sign in, click '+', select 'add device', then choose the fan from 'all devices'.
App automatically pairs; rename appliance and press 'done' to finish.
2.4GHz offers wider range and better wall penetration; 5GHz is faster but shorter range.
Check network names (e.g., 'home_5G') or device Wi-Fi settings.
Select preferred network from available list in device Wi-Fi settings.
To Next Page
General