6
USING YOUR AIR PURIFIER
CAUTION: Before using this appliance please ensure you have read and followed the steps on page 5
to correctly assemble the appliance and remove the outer packaging sleeve from the filter.
Once the appliance is plugged in the air purifier will send out a siren and all indicator lights will flash
three times. The power light will then illuminate.
Press the ON/OFF button and the appliance will enter AUTO mode. The indicator light of AUTO mode
and power light will be displayed.
The air quality indicator light will be green when the purifier is first switched onto AUTO mode, after
2minutes the indicator light will display the correct air quality.
To power off the appliance hold the ON/OFF button for 5seconds the power light will flash, and the
appliance can be unplugged from the mains.
USING THE FUNCTIONS
1) Air speed - Press SPEED button until you reach desired speed
NOTE: In AUTO mode, the air purifier will choose the air speed automatically according to
the air quality of the room.
2) Timer - Press TIMER button to select 1h,2h,4h,8h
3) Anion - Press ANION button (de-ioniser) and you will hear a beep and the indicator light will
be displayed.
4) Child-Lock Press & hold the Child-lock button for 3s and you will hear a beep and the
indicator light will be displayed. In this mode no other functions can be changed until the
child-lock function is switched off.
(1) (2) (3) (4)
To Next Page
Loading...