Need help?Do you have a question about the W Audio EP-500 and is the answer not in the manual?
General| Frequency Response | 20Hz-20kHz |
|---|---|
| Input Sensitivity | 0.775V |
| Signal to Noise Ratio | >100dB |
| Output Power (4 Ohms) | 500W |
| Output Power (8 Ohms) | 300W |
| Power Output | 500W |
| Outputs | Speakon, Binding Post |
| Cooling | Fan-cooled |
Keep equipment away from rain, moisture, and liquids. High voltage risk.
Manufacturer not liable for damages from non-observance or unauthorized modification.
Follow safety instructions, handle power cables with care, disconnect when not in use.
Explanation of LEDs (Clip, Protect, Power) and controls (Gain, Power Switch) on the front panel.
Details on input/output sockets, selectors, fuse holder, and AC power connection.
Advice on mounting amplifiers in 19-inch racks, including securing and weight distribution.
Recommendations for short, direct, and balanced input cables for optimal sound quality.
Guidance on using the Ground Lift Switch and connecting to the mains power supply.
Steps for powering on/off, setting gain controls, and understanding LED indicators during operation.
A chart detailing common issues like 'No Power' or 'No Sound' with their causes and remedies.
Instructions for cleaning the product using a soft, lint-free cloth, avoiding solvents.
Step-by-step guide for safely replacing the fuse using the correct type and rating.
Detailed technical data including output power, frequency response, input sensitivity, and connectors.
To Next Page
