What to do if equipment might be damaged when using W Box Technologies 0E-8P65W4POE?
Replace the equipment with a properly functioning 8 Port PoE Ethernet Switch to check if the equipment connected to your W Box Technologies Switch is damaged.
What to do if PoE equipment requires more than 30W power on W Box Technologies 0E-8P65W4POE Switch?
Please do not connect PoE equipment with power over 30W to your W Box Technologies Switch.
Illustrates the network setup for IP cameras and NVR using the PoE switch.
Lists technical specifications, compliance standards, and capabilities of the switch.
Advises on factors affecting transmission distance, emphasizing cable quality.
Shows the front and back panel layout with ports and indicators for the PoE switch.
Provides step-by-step instructions for safely connecting and powering up the device.
Offers guidance for common issues and troubleshooting steps for the PoE switch.
Explains the process for creating network plugs and testing cable integrity.
Specifies general conditions, exclusions, and scope of the product's warranty coverage.
General| Model | 0E-8P65W4POE |
|---|---|
| Ports | 8 |
| PoE Ports | 4 |
| PoE Budget | 65W |
| PoE Standard | IEEE 802.3af/at |
| Switching Capacity | 1.6 Gbps |
| Forwarding Rate | 1.19 Mpps |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Type | Unmanaged |
| Humidity | 10% to 90% non-condensing |
| Power Input | AC100-240V |
To Next Page