Notes
To reset the speaker (to clear the pairing list or any program
errors), use a straightened paper clip or a toothpick to carefully
short-press the reset button
The speaker will automatically shut down after 10 minutes in
pairing mode if no devices are paired
If your paired device is switched off or manually disconnected,
the speaker will enter pairing mode and automatically shut down
after 10 minutes
If the speaker or connected device exceeds the operating range,
the speaker will disconnect. The connection to the last successfully
connected device will be re-established once you re-enter wireless
range within 10 minutes. To connect to other devices, please repeat
the previous "Pairing" steps
AUX Function
I . Insert 3.5mm line-in cable to AUX socket at the back of the
speaker to connect external player device or computer
2. Green LED flashes when you enter the AUX mode
Notes
The speaker will disconnect from your phone or other paired
device when an audio cable is plugged into the audio input jack
When playing audio using the audio input jack, press the volume +
/ - to adjust the volume and short-press play / pause to pause or
resume. Next / previous track control on the speaker is disabled in
audio input mode
For some computers, you may need to access the audio control
panel to manually set the speaker as the default audio device
To Next Page
Loading...