Pairing
I . When you turn on the speaker, the speaker will automatically
enter pairing mode and the LED indicator will start to flash blue
rapidly
2. Activate the pairing function on your phone or other compatible
device and select "W-KING D8"
3. If a code or pin is required for pairing, please enter "0000"
4. When SUCCeSSfUIIypaired, the LED indicator will stay blue
Notes
To reset the speaker (to clear the pairing list or any program
errors), use a straightened paper clip or a toothpick to carefully
short-press the reset hole
The speaker will automatically shut down after 10 minutes in
pairing mode if no devices are paired
If your paired device is switched off or manually disconnected,
the speaker will enter pairing mode and automatically shut down
after 10 minutes
If the speaker or connected device exceeds the operating range,
the speaker will disconnect. The connection to the last SUCCeSSfUIIy
connected device will be re-established once you re-enter wireless
range within 10 minutes. To connect to other devices, please repeat
the previous "Pairing" steps
Playing Audio via Audio Input Connection
I . Connect the D8 to your PC, laptop, or other device with audio
OUtPUt port using the included 3.5mm audio cable
2. Long press the on/off button for 2-3 seconds to turn on, and the
LED indicator will light up solid green
04
To Next Page
Loading...