WABASH COMMUNICATIONS MBS-1P - User Manual

MBS-1P
Installation Guide
APRIL 2003
Heavy Duty Trailer ABS
by Wabash National
®

Summary

MBS Identification

Wabash MBS-1 P ABS Introduction

MBS-1 P System Components

System Component Overview

Component Listing (Figure 2)

Additional Component Listing (Figure 3)

ABS Regulations and Requirements

Power Requirements for ABS

ABS Malfunction Lamp Standards

Pneumatic System Installation

MBS-1 P Location and Mounting

Guidelines for selecting a location and mounting the MBS-1P unit.

Plumbing Instructions

Step-by-step instructions for pneumatic plumbing connections.

Approved Relay Valves and Sensors

ABS System Diagnostics

Initial System Checkout

Procedure to verify proper system operation after installation.

Pneumatic and Electrical Diagnostics

Troubleshooting The System

Flash Code Identification

Reference table for identifying system faults via flash codes.

Entering Diagnostic Modes

Procedures for accessing current and stored fault codes.

Clearing Stored Faults

Procedures for clearing stored faults.

Malfunction Lamp Diagnostic Switch

Sensor Signal Faults (Trace)

WABASH COMMUNICATIONS MBS-1P Specifications

General

Brand	WABASH COMMUNICATIONS
Model	MBS-1P
Category	Utility Vehicle
Language	English