To Next PageTo Next Page
Need help?Do you have a question about the WABCO PAN 17 and is the answer not in the manual?
Essential safety precautions and warnings to be observed during brake repair procedures.
Procedures for verifying brake function, including air gap and automatic adjuster checks.
Guidelines for inspecting brake pad thickness, wear limits, and condition.
Procedure to measure brake disc thickness, wear allowance, and check for damage.
Detailed steps for the removal and installation of guide pin gaiters and bushes.
Procedure for replacing the gaiter protecting the adjuster screw.
Reference to Section 2.4 for inspection procedures of the brake disc condition.
Instructions for the removal and installation of brake discs.
Essential safety precautions and warnings to be observed during brake repair procedures.
Procedures for verifying brake function, including air gap and automatic adjuster checks.
Guidelines for inspecting brake pad thickness, wear limits, and condition.
Procedure to measure brake disc thickness, wear allowance, and check for damage.
Detailed steps for the removal and installation of guide pin gaiters and bushes.
Procedure for replacing the gaiter protecting the adjuster screw.
Reference to Section 2.4 for inspection procedures of the brake disc condition.
Instructions for the removal and installation of brake discs.
General| Model | PAN 17 |
|---|---|
| Manufacturer | WABCO |
| Service Chamber Size | 17 in² |
| Actuation | Pneumatic |
| Temperature Range | Typically -40°C to +80°C (-40°F to +176°F), consult WABCO documentation for specific temperature ratings. |
